jump to navigation

Capacity for Spinning Plates October 2, 2009

Posted by Edwin Ritter in Trends.
Tags: , ,

Ever see the variety act where someone is spinning plates?  Briefly, this starts off with a guy (usually) putting a plate on a stick and spinning it. He then successively adds more and more plates while keeping the originals plates spinning.  In a short time, he gives each plate another spin to prevent it from slowing down, falling off the stick  and breaking. Dating myself, as a wee lad, I have seen this act on the Ed Sullivan show a few times. Good performers end up literally running between the two rows of sticks of spinning plates but all reach a point where he can’t keep all of them spinning.

maxed out multi-tasking

maxed out multi-tasking

This is a great visual to determine your workload capacity. You know have reached that point when the plates start to break.  I think this analogy aptly illustrates when you have just that much more on your plate that you can manage. If you can keep the current set of plates spinning, that equates to some extra, unused capacity. A clear sign to add some more!

Well, maybe not.  Seems odd that we strive to work to the point where we start making mistakes. Having more plates than you can keep spinning is not good business practice. Mistakes are bad – lost time, cost of goods, re-work and so on.

Of course, I appreciate the other extreme – barely working on tasks when you are capable of much more. You want to keep every plate spining while avoiding  having any one break. Good communications with your peers and management is key to working at or near capacity. 


 To help keep your plates spinning, I offer some suggestions :

  1. Establish and document clearly defined goals – they should be SMART (Specific, Measurable, Attainable, Realistic and Timed).
  2. Be honest about what you can and cannot manage. Do not over-promise and under deliver.
  3. Control what you can by assuming the best while preparing for the worst.
  4. Ask help for support when you need it. You are not alone; ask for expertise when it is beyond your skill set.

If you have buy-in from your manager on this approach, you can keep all plates spinning. If not, you have some work ahead of you. As a manager myself, I want to have my team on average working as close to capacity as possible. Taking the long view, this implies there are peaks and valleys in the workload. I’m OK with that knowing that there are ebbs and flows in the workload. And, I monitor progress to committed goals (see above) during the year and review this with each report on a regular basis. 

I don’t like the sound of breaking plates (or, glass either).  Disrupts the workplace, requires getting replacements and then there is the clean up also. Keep your plates spinning and when they start to fall off and break, dial back a bit!

How do you measure your capacity? How many ‘plates’ are you spinning?


1. Peter Principle – Fact or Fiction? « Ritter's Ruminations & Ramblings - October 5, 2009

[…] is also related to my last post on capacity. Possessing the knowledge and skills to do the job required and meet deadlines is a learned skill. […]

2. Cynthia Barton - October 22, 2009


I really enjoyed reading your ruminations. I remember the plate spiinging act and like many colleagues, have been doing my share. I am tired. How about you!

You have a wealth of experience and WOW what an internet and social marketing knowledge base. You should start doing speaking engagements….

Please stop in to the Professionally Speaking Toastmasters club meeting on October 27th as our guest if you can.

Edwin Ritter - October 26, 2009

Thanks for your comments – appreciate the feedback.

3. Ruminations on blog metrics « Ritter's Ruminations & Ramblings - June 16, 2012

[…] posts stopped for a time. While I was measuring, I was not managing. Perhaps I had a few too many spinning plates and some fell and broke. I was managing other things but not the blog and there was a definite […]

4. Multitasking is a myth | Ritter's Ruminations & Ramblings - June 16, 2015

[…] and make decisions will shape how work is organized, performed and how productive (see post on Capacity & spinning plates) any single person can […]

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: